Loadsensing Wireless Monitoring System
With the Loadsensing wireless monitoring system LS-G6, you can deploy the system anywhere, with long range communication up to 15km. You get 10 years of unattended operation – providing you with a flexible and affordable solution for a project when a cabled system is not suitable due to access restrictions or physical barriers. All data is transmitted in a secure manner.
There’s enough data storage for up to 72,500 readings (including timestamp and 5 sensors) or 200,000 readings (including timestamp and 1 sensor). Other features include a control port for operating a distributed sensor multiplexer, and the opportunity to individually configure each channel on the voltage data logger.​
Contact us for more information about this monitoring system.
Product Benefits
Wireless monitoring systems are the future for all your geotechnical, civil, and environmental monitoring needs. Some of the benefits of this system are:
- No cables; saves km of installation/maintenance
- Compatible with a wide range of geotechnical and environmental sensors
- Integration with Geomotion Cloud web-based software facilitating near real-time data capture, analytics and alarm configuration
- 24/7 remote information allows to anticipate problems and thus avert cost-intensive accidents
- Sampling rate: 30 seconds to 1 day
- Remote sampling rate change
- Optimisation of maintenance cycles by doing it only when and where truly needed
- Robust, enjoys longevity in harsh environments
- Easy to install, plug and use
Operation
The LS-G6 (Wireless Sensor Observation System) provides a system to transmit, receive and data log remotely signals from any sensor with a vibrating wire, voltage, 4-20mA, SDI12 or resistance output. ​
Software is embedded in the gateway which allows it to be fully configurable over air or Ethernet and a fast mode allows full diagnostics to ensure correct operation of the system.
- Connect sensor: easily plug sensors to the Loadsensing node, thanks to the friendly standard industrial connector.
- Install gateway: easy installation of the small gateway to receive/store/send all data from the nodes, via Ethernet, Wi-fi, 3G.
- Visualise/configure: set sampling rate, view real time or historical data remotely from your office. No need to install any software in your computer, thanks to the 24/7 free web application already installed in the gateway.
Application
Transmit, receive and data log remote signals. ​ Excellent applications for the Loadsensing wireless monitoring system include:
- Tunnels
- Bridges
- Dams
- Buildings
- Pipelines
- Oil detection
- Air pollution
