MEMS Piezometer Modem Logger Overview
|
The MEMS Piezometer Modem Logger combines a high capacity GSM/GPRS enabled datalogger with a small diameter MEMS Piezometer for use in fully or partially saturated soil and rock.
Readings are stored on a local SD card and are transmitted in engineering units to any FTP site via the on-board Quad band GSM/GPRS modem. Logger settings are easily configured by the user making the device completely adaptable to site changes. The Logger incorporates an intelligent ‘passive’ to ‘active’ alarm system with up to six user defined prioritisation thresholds, reducing battery consumption and an overload of needless data. The sensor element prevents the inclusion of gases and contains hydrophilic properties that ensure the functionality of the sensor, ensuring low noise levels and excellent stability. The addition of a rain gauge allows correlation between rainfall and ground water level changes. The MEMS Piezometer Modem Logger provides high accuracy, barometric correction, automatic data transmission and active alarming in one simple device, making it an ideal solution for automatic pore pressure measurements. |
| ||
Product Features |
|
Product Benefits |
|
Operation |
The logger is a high capacity two channel datalogger with an integrated barometric compensator. Channel one reads a MEMS piezometer and channel two reads a pulse sensor, such as a rain gauge.
The piezometer is suspended in a borehole or buried in fill and wired into the logger. The logger is attached to any suitable structure using appropriate fixings for the medium it is to be attached to. The unit can either be programmed manually using a Field PC with a USB cable or remotely via the FTP server by changing the settings file. The alarm system, SMS functions, reading intervals and schedules can be programmed or changed at any time, quickly and efficiently via the FTP site. The data can then be viewed by anyone at any time; all that is required is an internet connection and the log on details for the FTP server. The multi layered ‘passive’ to ‘active’ alarm system incorporates up to six user defined prioritisation thresholds. Once setup, the Logger remains in ‘passive’ mode logging at user defined intervals, until any of the pre-set alarm levels are breached, at which point it will automatically switch to ‘active’ mode and initiate increased data transfer to the FTP site whilst simultaneously sending out multi-level SMS text alerts to multiple contacts. |
Application |
Data loggers can form part of any automated monitoring system. Our data loggers are ideally suited for structural and geotechnical monitoring and are used extensively in harsh environments all around the world.
Typical applications for datalogged monitoring systems include:
|
Technical Rating |
As the correct installation of any monitoring sensor or system is vital to maximise performance and accuracy, Geomotion makes the following recommendations for the skill level of the installation contractor.
Technical Rating for this Product: INTERMEDIATE The installer already has previous experience and/or training in the installation of this instrument or system. Geomotion offer installation and monitoring services to support this system. For more information please email info@geomotion.com.au or call +61 (8) 9284 0244 |
SERVICES |
COMPANY |
|
